It could just be bad luck or a brief moment you weren’t paying attention to: You get a stone chip or scratch in the paint faster than you think. But it’s all half wild. Because here you can find out how you can make the scratch go away quickly and easily and fix it yourself. No matter how careful you are, paint damage and dents on a car can happen quickly. The shock is usually significant when such damage occurs. Above all, everyone knows that a visit to a professional painter can usually lead to huge costs. In addition, actions must be taken quickly, because even small damage to the coating is enough Rust to cause.
Paint Damage: You can often save yourself a professional!
You can safely remain relaxed with minor damage to the coating, because it can often be fixed without the help of a professional. The first step: Parts must be drawn degreased And cleaning will. It is better to use one for this purpose silicone remover. Hard-to-reach parts must be removed in advance. We now come to different cases of problems affecting the coating.
The clever fix: Do-it-yourself touch up paintwork
- Such damage is often found around door handles. However, by using a scratch remover, you can make them disappear quickly. Simply buff the affected areas for a few minutes, then wipe the residue with a damp cloth and let it dry for 15 minutes.
- Touch sticks are an excellent aid for this type of damage. They are available in almost all original colors from the manufacturer and in free trade and the application is simple. Stone chips are sanded with a wire brush, which is usually located in the lid. Then the varnish is carefully applied to the affected area. Once the paint is completely dry, the painted area is roughened with 1000 grit sandpaper and then sanded.
Deep damage to the coating:
- More effort is needed for deep scratches, paint chips, and rust spots. Repair the damage here before drawing Basic. In some cases it is easier to disassemble the defective part in advance. Now the patch is taped clean. Then a special filler is applied. After the filler dries, the filled area must be sanded so that all irregularities are eliminated. You should start with coarse grits and then work your way up to finer grits. Then it is drawn: It should be noted here that the affected area is well cleaned of sandpaper residues with a cloth and silicone remover. Then the area with one pen Then sprinkled with appropriate the color fee. Online stores, car dealerships, workshops and companies offer a huge selection of different paints in a variety of OEM colors from manufacturers.
Learn the limits of DIY
caution: If the damage is particularly bad, you won’t get further repaired with it fixed. Instead, the entire component has to be repainted here. You can take such projects into your own hands, especially if you do not mind the color differences and not necessarily a very valuable car. When doing paint repairs yourself, always be aware that anything beyond polishing won’t look as good as a professional does. But it is also clear that you can save a lot of money in a “do it yourself” way, which can certainly be spent in a more pleasant way.
The following note is necessary: For safety reasons, tuningblog recommends all repair, inspection and maintenance work exclusive In a specialized workshop! Although our information is summarized to the best of our knowledge and belief, we cannot take any responsibility for the content. So all information is “without warranty”.
Of course that was far from that!
In this Tuning Blog category are guides and instructions for common vehicle defects/repairs and for mounting accessories/tuning parts. Our articles explain in a simple way common defects and their corresponding fixes, as well as how the first signs of a defect become noticeable. In most cases, we also have preliminary guides for repair instructions in our repair instructions approximate Included costs. Our goalAuto Repair Manual“It is to create a knowledge launch for the next visit to the workshop with the initial tips. This may save you from tedious troubleshooting and you may be able to do little things on your own. The same, of course, applies to the installation of accessories / tuning of parts. Here too, we would like to help with implementation from During the how-tos and tips.There are many other posts about this as well.Next is an excerpt from the last and here are all the previous instructables.